ENERGIZER: DRUID 15LCD (E-DRUID/15/LCD)
Electric Fence Energizer Single Zone (made in South Africa)
PRODUCT DETAILS
▸ 4.6 Joule output energy (single zone)
▸ Robust and flexible design for home and commercial security
▸ Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
▸ Connectable to armed response radio or GSM module
▸ Easy-to-use tag included for controlling the energizer
▸ Powered by 240V mains and includes built-in battery for back-up power
▸ Built-in gate alarm input to monitor if the gate is open or closed
SPECIFICATIONS
Enclosure size | 285(L) x 212(W) x 120(D)mm |
---|---|
Weight | 3.1kg excluding battery (7AH) 5.3kg including battery (7AH) |
IP rating | IPx4 |
Operating temperature | -10°C to 50°C |
Operating humidity | < 80% non-condensing |
Electrical supply voltage | 240V |
Typical power consumption | 18VA (normal operating conditions) |
Standby Time | 24hrs (fully charged battery) |
Energy output | 4.6 Joule (500 Ohms load) |
Open circuit voltage | 9000V |
Druid 28LCD Energizer (E-DRUID/28/LCD)
Electric Fence Energizer Multiple Zone (made in South Africa)
PRODUCT DETAILS
- Two 3.7 Joule independently monitored and controlled zones
- The robust and flexible design is ideal for residential, commercial, industrial and high-security sites
- Each zone can be set independently to be on/off or in high/low voltage modes
- Can be programmed into alarm sensor mode allowing it to be integrated into a separate burglar alarm system
- Four zones can easily be created by linking two Druid 28LCD energizers together using the Druid four-zone keypad
- Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
- Connectable to armed response radio or GSM module
- Lightning and power surge protection
- Intelligent power saving to extend battery life
- Built-in gate alarm input to monitor if the gate is open or closed
- Optional keypad for controlling and programming the energizer. This allows the user to control the energizer remotely, with up to two keypads
- The relay expansion card can be used to increase the number of information outputs from the energizer
- Walk test mode for easy fence testing
- The LCD background colour changes to easily identify the fence condition
SPECIFICATIONS
Enclosure size | 400(L) x 270(W) x 125(D)mm |
---|---|
Weight | 5.7kg excluding battery (7AH) 8.0kg including battery (7AH) |
IP rating | IPx4 |
Operating temperature | -10°C to 50°C |
Operating humidity | < 80% non-condensing |
Electrical supply voltage | 240V |
Typical power consumption | 18VA (normal operating conditions) |
Standby Time | 24hrs (fully charged battery) |
Energy output | 3.7 Joule per zone (500 Ohms load) |
Open circuit voltage | 9000V |
Flat Bar Insulator (EI-FSB)
Fit for flat bar or square tube fencing brackets
PRODUCT DETAILS
- Quick fit clips on the top and bottom for faster installation
- Feed through clip option built in
- Easy to change and maintain
- Virgin materials are used in their manufacture which are designed for a long life.
SPECIFICATIONS
Material | UV stabilised plastic |
---|---|
Mounting | 4.0mm Hole Diameter |
Colour | Black |
Operating temperature | -40 to 80°C |
Operating voltage | 0 – 12KV |
Recycling | SPI 2 |
Jurassic Insulator (EI-JIB6.20)
Fit for square or round tube fencing brackets
PRODUCT DETAILS
- Large electrical tracking distance to reduce arcing in areas where there is pollution and salt build up
- Feed-through option for maximum security
- Slotted clip option available for a quicker wire placement
- Self Tapper Hooks are used to fasten the Jurassic insulator to the bracket or post and is available in two sizes
- Easy to change and maintain
SPECIFICATIONS
Material | UV stabilised plastic |
---|---|
Mounting | 6.2mm Hole Diameter |
Colour | Black |
Operating temperature | -40 to 80°C |
Operating voltage | 0 – 12KV |
Recycling | SPI 2 |
Strain Insulator (EI-STB/R)
Fit for steel picket posts, also compatible with the star pickets
PRODUCT DETAILS
- Suitable for fences using up to 2.0mm wire
- Operating tension of 25kg
- Larger tracking distance to reduce power loss and arcing
- Suitable for medium-tensioned fences
SPECIFICATIONS
Material | UV stabilised plastic |
---|---|
Colour | Black |
Operating temperature | -40 to 80°C |
Operating voltage | 0 – 12KV |
Recycling | SPI 2 |
Nail-On Insulators (EI-NOB2)
Screwed or bolted onto metal brackets or wooden posts
PRODUCT DETAILS
- Can be screwed or bolted onto metal brackets or wooden posts
- Large clips for heavy-duty applications with thicker wire
- Larger clearance to eliminate power leakage
- Easy to change and maintain
SPECIFICATIONS
Material | UV stabilised plastic |
---|---|
Mounting | 5mm Hole Diameter |
Colour | Black |
Operating temperature | -40 to 80°C |
Operating voltage | 0 – 12KV |
Recycling | SPI 2 |
Picket Insulator (EI-PI)
Screwed or bolted onto metal brackets or wooden posts
PRODUCT DETAILS
- Used with Nemtek Y-picket (for the Iscor Y-standard use the EI-YB insulator)
- Double tracking fin to reduce arcing
- Quick-fit design clip – easy to replace when required
SPECIFICATIONS
Material | UV stabilised plastic |
---|---|
Colour | Black |
Operating temperature | -40 to 80°C |
Operating voltage | 0 – 12KV |
Recycling | SPI 2 |
Mini Nylon Tensioner (ES-DT/MN)
Electric Fence Energizer Multiple Zone (made in South Africa)
PRODUCT DETAILS
- A nylon plastic body eliminates galvanic reaction between dissimilar metals, reduces rust and increases the lifespan of the wire
- Ideal for tensioning up to 1.2 mm galvanised or stainless steel wires, and up to 1.6 mm aluminium wire
- Can be used to tension the fence after installation
- A large headed screwdriver is used to turn the spindle
SPECIFICATIONS
Material | UV stabilised plastic inner with glass filled nylon spindle |
---|---|
Colour | Black |
Spring Tension | Maximum 5kg |
Operating temperature | -40 to 80°C |
Operating voltage | 0 – 12KV |
Recycling | SPI 7 |
Hybrid Combo Tensioner BB (ES-CTNTBB)
Fit for steel picket posts, also compatible with the star pickets
PRODUCT DETAILS
- A hardy heavy duty tensioner for all weather types
- Can tension up to a 2.5mm steel wires
- It eliminates galvanic reaction between dissimilar metal and eliminates rust
- Can be used with any type of wire
- Uses a ratchet tensioner to tension the fence
SPECIFICATIONS
Material | UV stabilised glass filled nylon |
---|---|
Spring Tension | Maximum 120kg |
Operating temperature | -40 to 80°C |
Operating voltage | 0 – 12KV |
Recycling | SPI 7 |
Compression Spring 1 (ES-CNT)
Combines a compression spring and a tensioner all in one
Fit for strained wire, for tensioning up to 1.6 mm aluminum wire
PRODUCT DETAILS
- A plastic inner which eliminates galvanic reaction between dissimilar metals, reduces rust and increases the lifespan of the wire
- Can be used with any type of electric fence wire
- Standard tension compression spring (silver) which can tension up to 1.2 mm wire
- Stainless steel spring maintains constant tension on the fence
SPECIFICATIONS
Material | Stainless steel spring UV stabilised plastic inner |
---|---|
Colour | Black |
Spring Tension | Standard 5kg |
Operating temperature | -40 to 80°C |
Operating voltage | 0 – 12KV |
Recycling | SPI 2 |
Hybrid Compression Spring 3 (ES-CNT3HB)
Combines a compression spring and a tensioner all in one
Fit for strained wire, for tensioning up to 1.6 mm aluminum wire
PRODUCT DETAILS
- Heavy duty durable design
- Combination of a compression spring and a ratchet tensioner
- Hardy glass filled nylon spindle
- A plastic inner which eliminates galvanic reaction between dissimilar metals, reduces rust and increases the lifespan of the wire
- Can be used with any type of electric fence wire
- Heavy tension spring (gold) which can tension up to 1.6mm galvanised and stainless steel wire, and 2.0mm aluminium wire
- Stainless steel spring maintains constant tension on the fence
SPECIFICATIONS
Material | Stainless Steel UV stabilised plastic inner with glass filled nylon spindle |
---|---|
Colour | Black |
Spring Tension | Heavy 15kg |
Operating temperature | -40 to 80°C |
Operating voltage | 0 – 12KV |
Recycling | SPI 7 |
Stranded Aluminium Wire (EW-AL16S)
The flexibility offered by the stranded aluminum wire construction makes working with this wire easier during installation and results in a neat clean look on the fence without compromising the fences performance
PRODUCT DETAILS
- Low electrical resistance allows for longer fences to be powered by an energizer
- Good corrosion resistance for most environments (+5km from coastline)
- Easy to work with stranded wires
SPECIFICATIONS
Material | Aluminium alloy | |
---|---|---|
Construction | Stranded | |
Elongation |
|
|
Resistance |
|
|
Stranded Aluminium Wire (EW-AL20S)
The flexibility offered by the stranded aluminum wire construction makes working with this wire easier during installation and results in a neat clean look on the fence without compromising the fences performance
PRODUCT DETAILS
- Low electrical resistance allows for longer fences to be powered by an energizer
- Good corrosion resistance for most environments (+5km from coastline)
- Easy to work with stranded wires
SPECIFICATIONS
Material | Aluminium alloy | |
---|---|---|
Construction | Stranded | |
Elongation |
|
|
Resistance |
|
|
Solid Stainless Steel Wire (EW-SS16/316 or EW-SS20/316)
Nemtek aluminum wire has the lowest resistance allowing long fences to be powered up, reducing the number of energizers needed
PRODUCT DETAILS
- Stainless steel grade 304 can be used in most corrosive environments and near the coast (+50km from coastline)
- Stainless steel grade 316 can be used in most harsh corrosive environments and on the coast (+0.1km from coast)
- High in tensile strength
SPECIFICATIONS
Material | 304 Stainless steel 316 Stainless steel |
---|---|
Construction | Solid |
Tensile Strength | AISI 316 SS, Ultimate – 580 MPa (58kg/mm2) AISI 304 SS, Ultimate – 510 MPa (50kg/mm2) AISI 316 SS, Yield – 290 MPa (29kg/mm2) AISI 304 SS, Yield – 215 MPa (21kg/mm2) |
Elongation | AISI 316 SS – 50% at Break AISI 304 SS – 70% at Break |
Undergate HT Cable (U-Series) (AH-UC1.6/100)
This U-Series underground cable is used to carry the electricity from the energizer to the electric fence in a safe and insulated manner
PRODUCT DETAILS
- Ideal cable when aluminium wire is used
- Low electrical resistance reducing power and voltage drops over large distance
SPECIFICATIONS
Material | Aluminium UV stabilised double insulated cable |
---|---|
Roll size | 100m |
Type | Solid Single Core |
Colour | Black |
Conductors | Single core HT cable – 1.6mm solid inner conductor |
Aluminium HT Cable (A-Series) (EH-AS100)
The A-Series high voltage electric fencing insulated cable is used as a lead out cable from your energizer to the fence and for all other insulated high voltage transmissions
PRODUCT DETAILS
- Heavy duty design for harsh environments
- Double insulated UV stabilised outer and inner sheaths
- 1.6mm diameter inner conductor wire for medium cable runs
- 2.5mm diameter inner conductor wire for long cable runs and large fences
SPECIFICATIONS
Material | Solid heavy galvanised inner conductor |
---|---|
Roll size | 100m |
Colour | Black |
Diameter | 1.6mm |
Resistance | 1.6mm – 98 Ohms/km |
HT Cable (S-Series) (EH-BS100S)
The S-Series high voltage cable is used as a lead out cable for swing gate
PRODUCT DETAILS
- Slimline design for ease of installation and an aesthetically pleasing look
- Cable is made up of tinned copper stranded wires for more flexibility and ease of us
SPECIFICATIONS
Material | UV Stabilised, double insulated, Tinned copper stranded wires |
---|---|
Roll size | 100m |
Type | Single Core |
Colour | Black |
Double Pole Lightning Protection (EA-LIDII)
Double pole lightning protection system inhibits lightning and diverts the voltage spikes caused by lightning. Can protect the output and also the return of a security energizer
PRODUCT DETAILS
- Built-in lightning inhibitor inhibits lightning from getting to the energizer.
- Built-in lightning diverter diverts the lightning from the energizer into the earth spikes
- External cover and stainless steel components for use outdoors near the fence
SPECIFICATIONS
Material | UV stabilised plastic housing |
---|---|
Finish | Stainless steel components for long life |
IP rating | IP54 |
Timed Fence Light (SR-FL/TL/SS)
The intensity of the light remains the same so it can be seen from far irrespective of the fence voltage. It is installed between the earth and live wire to indicate the status and condition of the fence for peace of mind
PRODUCT DETAILS
- Blue fence light for stainless steel wire
- Visible from up to 1km at night and 100m during the day
- No batteries required – uses minimal power from the fence
- Highly visible LEDs allow for a 160-degree viewing angle. This allows the light to shine into the secure area only
- Can operate from 0.9kV to 12kV
- Can be used with most electric fence energizers
SPECIFICATIONS
Material | Plastic and water tight compound |
---|---|
Steel wire connectors | Stainless Steel |
IP rating | IP67 |
2-Way Gate Contact (EA-SGC07)
Nemtek heavy duty sliding gate contact is used for series wiring of sliding gates
PRODUCT DETAILS
- Heavy duty design for all weather types
- Large location plates allow for increased tolerance
- Available with brass cable connectors or crimp lug connectors
- Available with an earth plate option with brass cable connectors
- Mounting bracket available
SPECIFICATIONS
Material | Brass Stainless Steel UV stabilised Nylon |
---|---|
Dimensions | Dimensions of Part 1: 80(L) x 60(H) x 118(D)mm Dimensions of Part 2: 95(L) x 60(H) x 114(D)mm |
Warning Sign (EA-WRS2/N)
Warning signs must be placed along the fence line to warn off the existence of an electrified fence. These must be placed at 10m intervals along the fence, at gate ways or whenever there is a change of direction. Wire clips on the warning sign reduce installation time
PRODUCT DETAILS
- IEC 60335-2-76 compliant design
- Double-sided
- Four quick-fit clips that fit on most diameter wires for quick installation and to prevent flapping and movement due to wind.
SPECIFICATIONS
Material | UV stabilised plastic |
---|---|
Size | 200mm x 100mm |
Colour | Yellow with black writing |
Fence Scope Multi Tool (TL-FS)
The Fence Scope is a 4 in 1 tool, which helps diagnose problems on your fence to optimize electric fence installation and ensure that the fence continues to operate at ideal levels
PRODUCT DETAILS
- It is used to crimp all Nemteks range of ferrules, including the aluminium, stainless steel and tinned copper range
There are four operation modes to select from: - Fence Probe mode –quickly indicates the direction of a fence fault, showing the voltage and current
Fence energy mode- accurately measures the output energy along the fence. This mode can be used to test the size of the shock the intruder will receive at any point along the fence by simulating the intruder. This helps to ensure that the voltage and the energy is sufficient along the entire fence to deliver an appropriate shock to the intruder. - Fence scope mode –this can record and display wave forms of the electric fence pulse. Distortions in the wave form (wave shape) generally indicate that there are fence faults.
- Fence noise mode –this shows the amount of electromagnetic interference generated by the fence or energizer. This feature assists in finding cracked or broken insulators, sparks and shorts along the fence.
SPECIFICATIONS
Display | Liquid-Crystal Display (LCD) Landscape Orientation 1bit/pix colour depth 128 x 64 Pixels |
---|---|
Operating temperature | -10°C to 50°C |
Battery Type | 9V alkaline, 6LR6 / PP3, 50 hours typical battery life (without using backlight) |
Size | 102 mm W x 50 mm H x 192 mm L |
Weight | 251g (without battery) 298g (with battery) |
Metal Box Siren Strobe (SRS)
Metal Siren Box and Strobe Light
PRODUCT DETAILS
- The sirens are audible indicators that alerts you if there is an alarm condition
- Strobe Siren Signal Warning Light Flash LED Lamp
- Designed to be weather resistant for indoor and outdoor use
SPECIFICATIONS
Metal Box Dimensions | L140mm x W55mm x H20mm |
---|---|
Power supply | 12V DC |
Siren power output | 20W |
Siren rated current | 330mA |
Strobe light rated current | 120mA |
Powder Coated Metal Enclosures (CVS-642)
A powder coated metal enclosure which is ideal for housing energisers and accessories. It is weatherproof and can be used outdoors
PRODUCT DETAILS
- Wooden electrically isolated backing plate for mounting the energizers and accessories
SPECIFICATIONS
Material | Metal box with clear acrylic inspection window with a wooden backing board |
---|---|
Finish | Powder Coated (PC) |
IP rating | IP54 |
Size | Medium 305(W) x 460(H) x 230(D) Large 460(W) x 600(H) x 230(D) |
EARTH COPPER ROD (ECR)
The copper cladded earth spike or stake is used to earth the electric fence system
PRODUCT DETAILS
- Copper clad nuts and washers
- Available in both 1.0m and 1.2m lengths
- The double nut and washer allow for a good electrical connection with the HT cables
SPECIFICATIONS
Material | Copper claded |
---|---|
Lengths | 10mm x 1.0m 10mm x 1.2m |
EARTH COPPER ROD JOINT (ECRJ)
The copper cladded earth spike or stake is used to earth the electric fence system
PRODUCT DETAILS
- Couple socket for copper rod
SPECIFICATIONS
Material | Copper |
---|---|
EARTH COPPER ROD CLAMP (ECRC)
The copper cladded earth spike or stake is used to earth the electric fence system
PRODUCT DETAILS
- Clamp for copper rod
SPECIFICATIONS
Material | Copper |
---|---|
EARTH CHAMBER PLASTIC ENCLOSURE (ECPE)
Earth chamber for electric fence’s earthing system
PRODUCT DETAILS
- Earth chamber
SPECIFICATIONS
Material | PVC Plastic |
---|---|
EARTH CHAMBER CONCRETE ENCLOSURE (ECCE)
Earth chamber for electric fence’s earthing system
PRODUCT DETAILS
- Earth chamber
SPECIFICATIONS
Material | Concrete |
---|---|